Questions / Most popular

Why are LED light bars better than other lights?

  • Demand has been fed by advances in manufacturing that have led to lower-cost LEDs, coupled with the inherent operational benefits of LED over rotating halogen and incandescent light bars. LEDs, not like halogen lights, use a semiconductor to create light with electrons. Halogen lights require heating gas to a high temperature to achieve a burst of light.
  • LED light bars alone provide a significant benefit due to their longer lifespan. However, when LEDs reach the end of their lifespan, they start to dim. They do not turn off completely, leaving the driver stranded. The owners and drivers can be forecasted and take adequate preventive measures. Drivers will save a lot of money by not being stranded on the roads for more extended periods.
  • Energy efficiency is 90% greater than revolving halogen or incandescent light bars due to the low current draw in the LED light bars. Their Illumination is brighter and extensive due to high vibration resistance, and LED bulbs are much less likely to break than glass bulbs. Most LED bulbs have a light expectancy of more than 50,000 hours. And there are several flash patterns available.

Why are LED lights better than regular bulbs?

  • Ordinary Fluorescent lights contain toxins like mercury, Which poses a waste disposal problem after turning off lights. A limited quantity of hazardous mercury is released as a gas by broken bulbs, while the remaining will trap in the glass itself.
  • Ordinary lights are omnidirectional, which leads emitted light at a 360-degree angle. Because half of the light must be reflected and redirected to the desired location, this is a significant system inefficiency. It also means that more light fixture accessories are needed to reflect or focus the bulb’s luminous output (thus increasing unit costs).
  • In comparison to other lighting technologies, LEDs have an extraordinarily long lifespan (including fluorescent lights). For example, new LEDs have a life expectancy of 50,000 to 100,000 hours or more. In comparison, the average lifespan of a fluorescent bulb is only 10-25 percent of that of an incandescent light.
  • In comparison to other commercially available lighting technologies, LEDs are particularly energy-efficient. There are various reasons for this, including the fact that they lose relatively little energy in the form of infrared radiation (far less than most conventional lights, including fluorescent lamps), and they emit light in a specific direction.

How much power does a regular street light consume?

  • The number of led watts is different from the standard high-pressure sodium lamp wattage, such as high-pressure sodium lamp 100w, equivalent to led 36w, 150w, equivalent to led 60w, and so on.
  • They are both energy-efficient and long-lasting, consuming 90% less energy than incandescent bulbs. From televisions to billboards to advertisements on public transportation, consumers and companies alike have been making the switch to LED. As a result, the LED Display has become a common sight in our everyday lives. Nonetheless, they have their own set of technological difficulties.
  • The height of the light pole and the power of the light source have a direct relationship. However, a modest wattage light source is mounted on the taller street light; in theory, the higher the light pole, the greater the strength of the light source. It can also be used to illuminate the ground. However, the brightness and illumination ratios aren’t perfect.
  • Whether it is equipped with high-pressure sodium lamps or metal halide lamps, the usage of environmental conditions will also affect their power, such as the installation of street lamps in rural areas and in the city center, even in two regions. The installed poles are the same height, but the light source layout will be entirely different.

How to choose a quality LED lighting manufacturer?

  • Lumens Per Watt: Any light source’s efficiency should be measured in lumens per watt. LEDs with a power consumption of 9 to 12 watts may produce the same amount of lumens as traditional 40- or 60-watt lamps. Choose an LED bulb that generates close to 800 lumens to replace a 60-watt bulb and 450 lumens for a 40-watt bulb.
  • Power Factor: The power factor is a critical criterion for evaluating the quality of any electrical device. The effective ratio of real power (used power at load) to visible power from your metre is referred to as the power factor. Therefore, a wise buyer will look at the wattage of any LED light and the power factor.
  • CRI (Color Rendering Index): Only Sunlight receives a CRI of 100 on a scale of 0 to 100. Under a light with a CRI of 100, colours appear to be just as they should. The basic principle is that the higher the CRI, the better the colours appear, and the lower the CRI, the worse the colours appear. In comparison to incandescent/halogen, LED has the second-highest CRI rating. On the other hand, LED illumination is still improving up to a factor of 100, thanks to research and development.
  • Colour Temperature: LEDs come in a wide range of colour temperatures, from 2800K to 6500K, as seen below.

2700K-3500K (warm white) (dusk time yellow light)

4000K-4500K (neutral white) (bright sunlight little yellow)

5000K-6500K (cool white) (pure white, cool daylight)

  • Heat Sink: Remember that LEDs require a heat sink to last a long time. That’s why LED bulbs feature metal fins that run down the side, giving them a distinct appearance from traditional Edison-style bulbs. The heat sink dissipates any extra heat and keeps the LEDs at the optimal operating temperature, extending the life of the primary LED chip.
  • The qualities mentioned above should be taken into consideration while choosing the LED lighting and manufacturer, for that matter. Jaquar provides you with lighting as per your needs and fulfils all the requirements a good LED lighting needs to have.

Can I use regular led lights to grow indoor plants ?

  • LEDs are the only light sources that can be customized to give the proper spectrum and do fantastic things for plant growth because they are monochromatic sources and come in a wide variety of pure hues. Plants grow faster and healthier under LEDs than under other, more traditional lighting techniques like HPS, and even better than under natural sunshine if the LEDs are suitable.
  • Not A whole spectrum of colors is present in all light sources; however, specific light sources only comprise a portion of the range. On the other hand, Sunlight encompasses all the spectrum colors and provides energy to plants, triggering metabolic responses or influencing behavior. In addition, plants respond differently to different shades of LED chips installed inside the light.
  • Red and blue are the two most critical light colors in an LED bulb. The color red is essential for photosynthesis and stem elongation inhibition. Furthermore, it informs the plants that there are no other plants above them, allowing them to develop freely. On the other hand, stomatal opening, stem elongation inhibition, leaf expansion, and curving toward light are all stimulated by blue.
  • Plants can be grown in the house with regular LED bulbs, but only to a limited extent. Because blue plays such a significant role, a 6000K CC cool-white LED with a higher concentration of blues is chosen over a warm-white LED with a lower concentration of blue and a more significant red concentration. In either case, the green section of the spectrum wastes energy. The total cost of fuel used will determine the viability of bio-products. Thus go for a blue and red light.

What are the most efficient lighting systems for homes?

According to a study, the India LED Lighting Market is developing at a CAGR of 23.6 percent by 2025. The LED lighting market in India has exploded in recent years with the country’s expanding population and accompanying urbanization. In 2018, India’s energy demand increased by 4%, outpacing the global market by 2.3 percent.

  • Use of  electricity is rising, which makes the demand for an environmentally responsible and cost-effective lighting solution. As a result, LED lighting has begun to permeate India’s mainstream general lighting industry in recent years.
  • The Northern region generates the most revenue in India’s entire market, followed by the Southern part. The demand for LED lights and luminaries is developing to expand significantly in the next few years, thanks to various upcoming infrastructure projects in the country’s residential, industrial, and commercial sectors.
  • The goal of various government campaigns is to raise consumer awareness about the benefits of LED bulbs over traditional lighting sources, including incandescent bulbs, CFLs, and halogen lights. For example, the government plans to replace around 1.34 crore conventional street lights in India under the SLNP, with around 1.04 crore already replaced as of November 2019.

What is the LED lighting market from 2018 to 2025?

  • According to a study, the India LED Lighting Market is developing at a CAGR of 23.6 percent by 2025. The LED lighting market in India has exploded in recent years with the results of the country’s expanding population and accompanying urbanization. In 2018, India’s energy demand increased by 4%, outpacing the global market by 2.3 percent.
  • The use of electricity is rising when the need for an environmentally responsible and cost-effective lighting solution. As a result, LED lighting has begun to permeate India’s mainstream general lighting industry in recent years.
  • The Northern region generates the most revenue in India’s entire market, followed by the Southern part. The demand for LED lights and luminaries is developing to expand significantly in the next few years, thanks to various upcoming infrastructure projects in the country’s residential, industrial, and commercial sectors.
  • The goal of various government campaigns is to raise consumer awareness about the benefits of LED bulbs over traditional lighting sources, including incandescent bulbs, CFLs, and halogen lights. For example, the government plans to replace around 1.34 crore conventional street lights in India under the SLNP, with around 1.04 crore already replaced as of November 2019.

What all are the fastest industries adopting LED lighting the fastest?

  • Intelligent lighting applications have grown broader and more diversified in recent years, thanks to the popularisation of technology, products, and pertinent concepts, including commercial/industrial lighting, outdoor lighting, household lighting, and public lighting, among others. The innovative lighting solutions are the first installed in public and outdoor spaces in these domains.
  • The construction of smart cities in smart lighting industries are now driven by infrastructure construction in public and outdoor spaces in the largest market. The United States, the United Kingdom, Germany, the Netherlands, Japan, South Korea, and Singapore  built smart city plans in the early twenty-first century, kicking off the global trend of smart city construction.
  • Smart lighting solutions have been implemented to street lights, which are widely distributed in cities, to achieve automatic brightness adjustment depending on traffic, remote lighting control, defect warning, anti-theft and monitoring of street lamp power connections, and remote meter reading, among other things.
  • Smart lighting may save a lot of energy, improve the public lighting control system, and reduce maintenance expenses. That’s why smart lighting is becoming more popular in city development.

How to use an LED strip light in a home design?

  • You can use led strip lights and place them up, down, and across the frames. Then, bend and twist the strips in whichever way you like to decorate a space or a corner. 
  • Cover outdoor frames with LED lights that will withstand rain and snow. By alternating different-colored strips or selecting bulbs that change colors automatically, you can give your house a unique and festive look.
  • Call out different words and phrases with tiny, flexible LED modules available at Jaquar. Ensure that your message is visible late into the night, assured by LEDs’ established reliability. At any time of night, the lights glow for endless hours without flickering or burning out. 
  • Wrap small LED lights around trees and plants in your home. Since LED lighting is great for highlighting, invest in a large bulb that highlights a single object. Floor to ceiling, LED lights anywhere in or around the garden.

What is the best lighting for a living room?

  • Lighting is one of the most important aspects of a room. To take your living room’s lighting to the next level, consider a few factors like the color of the wall, texture, and other factors. 
  • A successful lighting design incorporates multiple light sources at various levels around the space. For a flexible area, overlay light from a variety of sources that can be used together or individually.
  • Wall lights are a perfect way to dress up an empty wall, frame a sofa, or highlight a piece of artwork. Consider a pair of eye-catching, sculptural sconces or a single light for a more minimalist design.
  • A Chandelier completes the living room, and you can use the piece to brighten the seating area and create a focal point. Make your living room a center of attraction by Installing a beautiful piece. You can look out for various options available on the Jaquar site.