What are the best small bathroom decoration ideas?

  • Vanity lighting is sometimes disregarded in tiny bathrooms due to the restricted area available around the mirror. Instead, a ceiling lamp is used to illuminate the vanity, which results in undesirable shadows and splotchy lighting. Installing a lighted mirror is a fantastic way to generate the bright task lighting suitable for a vanity without restricted space around the mirror.
  • In a small bathroom, every inch of available space is valuable. However, the region beneath a shelf, cabinet, or countertop is typically difficult to light, resulting in a gloomy zone that makes the room feel smaller. Install under-cabinet lights or tape lights to highlight poorly-lit shelves or open counter space under cabinets.
  • With sleek, clean lines and a white, frosted diffuser, a bathroom ceiling light positioned flush against the ceiling will fit in seamlessly with the room’s design. When lighted, the diffuser distributes light evenly throughout the space, keeping the area well-lit. A flush mount ceiling light will keep a bathroom feeling open with its sleek form and even amount of light cast. Get your hands on the best lights available out there at Jaquar.

What is the LED light wattage required in a room?

  • It depends on the size of the room. One can take a scientific approach by determining room size and desired brightness levels. 
  • Each watt consumed determines how many lumens a light produces—the greater the number, the better the light. Therefore, lighting items by Jaquar, for example, are considered high efficacy since they have been verified to provide the same functionality while using less energy.
  • You’ll need a few more watts if you have really dark-colored walls and furnishings or if you’re utilizing fixtures with shades. You may choose to increase our numbers by 10 to 20% if you want the room to be very bright. Aiming high and using dimmers to bring the light level down to acceptable levels is ideal.

How to choose the best-LED Panel Lights in India?

  • Lumens Per Watt: Any light source’s efficiency should be measured in lumens per watt. LEDs with a power consumption of 9 to 12 watts may produce the same amount of lumens as traditional 40- or 60-watt lamps.
  • Power Factor: The power factor is a critical criterion for evaluating the quality of any electrical device. The effective ratio of real power (used power at load) to visible power from your meter is referred to as the power factor. Therefore, a wise buyer will look at the wattage of any LED light and the power factor.
  • CRI (Color Rendering Index): Only Sunlight receives a CRI of 100 on a scale of 0 to 100. Under a light with a CRI of 100, colors appear to be just as they should. The basic principle is that the higher the CRI, the better the colors appear, and the lower the CRI, the worse the colors appear. In comparison to incandescent/halogen, LED has the second-highest CRI rating. On the other hand, LED illumination is still improving up to a factor of 100, thanks to research and development.
  • Colour Temperature: LEDs come in a wide range of color temperatures, from 2800K to 6500K, as seen below.

2700K-3500K (warm white) (dusk time yellow light)

4000K-4500K (neutral white) (bright sunlight little yellow)

5000K-6500K (cool white) (pure white, cool daylight)

  • Heat Sink: Remember that LEDs require a heat sink to last a long time. The heat sink dissipates any extra heat and keeps the LEDs at the optimal operating temperature, extending the life of the primary LED chip.